CAPABILITIES
![](https://i0.wp.com/www.gcfcarbonfiber.com/wp-content/uploads/2022/12/cfpngs.png?fit=927%2C960&ssl=1)
01.
Autoclave Curing
- Superior quality and unmatched expertise under one roof.
Curing composite components using an autoclave is one of the most proven methods for curing pre-preg thermoset materials. It allows for achieving high-quality surface finishes, and greater ply consolidation, as well as more significant control over the curing process assuring the accuracy of the fiber placement for Class A and structural requirements. We specialize in the production of autoclave-cured components, maintaining specific cure cycle parameters based on materials and process specifications. Our expertise extends to advanced knowledge of various composite materials, including carbon fiber, fiberglass, and Kevlar, and the tooling configurations that are appropriate for our customer’s project goals. We use the autoclave methodology to support a variety of business verticals for substantial-volume and low-volume projects.
![](https://i0.wp.com/www.gcfcarbonfiber.com/wp-content/uploads/2022/12/微信图片_20221024165116.webp?fit=2272%2C1704&ssl=1)
02.
Bladder Molding
- Ideal cosmetic standards and adept tooling solutions.
We understand the complexities of designing bladder molding solutions that can yield the required geometry and volume for our customers’ projects. We are always looking to push the development of tooling solutions to create opportunities for our customers that can drive costs down without compromising the quality of components.
Bladder molding is an especially useful method of composite part manufacturing when the parts have complex geometry and high-quality requirements for both their internal and external surfaces. We use this method when producing high and low volumes of small and medium-sized components and also to minimize secondary processing requirements.
![](https://i0.wp.com/www.gcfcarbonfiber.com/wp-content/uploads/2022/12/Molding-carbon-tubes.webp?fit=1080%2C1080&ssl=1)
03.
Compression Molding
- Large runs with first-rate productivity.
We can create sophisticated parts with high-volume runs in a timely and efficient manner using compression molding. At GCF, we have the capability and in-depth experience in processing a variety of composite materials like Kevlar, carbon fiber, and fiberglass using this methodology.
Our twin composite presses allow us to manufacture large-volume production runs. This process uses matched metal tooling, that is pre-heated to a specified cure temperature rapidly decreasing the per part cycle times. By selecting an appropriate resin system for the application we can cure components in roughly 25 minutes or less and in as short as 3 minutes using a “snap cure” resin system in some cases.
![](https://i0.wp.com/www.gcfcarbonfiber.com/wp-content/uploads/2022/12/carbon-tube-61.webp?fit=750%2C750&ssl=1)
04.
Cast Molding
- Flexibility meets efficiency.
We use cast molding as a tooling option because it’s a cost-effective and time-efficient solution that is easily repeatable while at the same time flexible enough to modify direction with minimal impact on the project’s outcomes. The flexibility and repeatability allow us to produce components with complex surface geometry that would typically require expensive tooling solutions, at a competitive price. This method is a great solution for lower volume production and prototype development of a part.
![](https://i0.wp.com/www.gcfcarbonfiber.com/wp-content/uploads/2022/12/carbon-foam-sheet-14.webp?fit=750%2C750&ssl=1)
![](https://i0.wp.com/www.gcfcarbonfiber.com/wp-content/uploads/2022/12/IMG_1467-13.webp?fit=1080%2C1080&ssl=1)
MOQ: Accept small qty
Cut to dimensions with a CNC machining center, ensuring stable and precise measurements.
you can depend on High-quality service, we will treat every email within 12 hours(usually much faster)
Fast delivery: via FedEx, UPS, DHL, TNT, etc ( will take 4 days to arrive) Fast production time – just 7 days –you can get it ASAP.
![](https://i0.wp.com/www.gcfcarbonfiber.com/wp-content/uploads/2022/12/Car-keychains-4.webp?fit=1080%2C1080&ssl=1)
Carbon fiber products
Extraordinary appearance, without any defects related to air microbubbles (pinholes) – widespread in the case of manually produced sheets.
Reduce your customer complaints. With high strength and tighter tolerances control, our CNC machines can cut carbon fiber parts to any shape or size within +/- .05mm to ensure a perfect fit.
![](https://i0.wp.com/www.gcfcarbonfiber.com/wp-content/uploads/2022/12/IMG_7810-2.webp?fit=1080%2C1080&ssl=1)
Carbon Fiber Sheets
GCF plates are made of 100% Toray carbon fiber from Japan. very strong and lightweight, perfect for any application including RC, drones, helicopters, etc. we have in stock wide various sizes of carbon fiber sheets, Whether your project is big or small, we are bound to have a product that suits your needs. GCF carbon fiber has the right plate for your needs.
![](https://i0.wp.com/www.gcfcarbonfiber.com/wp-content/uploads/2022/12/IMG_9211.webp?fit=1080%2C1080&ssl=1)
CNC Carbon fiber
Our advantage is the supply chain and CNC machine, the newly introduced CNC has cut our operating cost by 30%. it means we can help you save your cost and time,
Our sheet is made with advanced infusion technology (in a vacuum) that ensures stiffness is improved by approximately 30% compared to manually produced sheets. Make your products lighter and more robust.
About
No Job Is to Big for Us. We'll Get It Done.
We explore new techniques and manufacture new products to meet our customer’s requirements according to different customers’ and environments’ requests. Processing with supplied drawings and samples will be welcome.
We believe passionately in great bargains and excellent service, which is why we commit ourselves to giving you the best of both, if you are looking for something high-quality carbon fiber products, you are in the right place, we strive to be dynamic and innovative, offering our customers something they want, putting their desires at the top of our priority list.
Why Us?
![](https://i0.wp.com/www.gcfcarbonfiber.com/wp-content/uploads/2022/12/why-us-01-free-img.jpg?fit=1140%2C400&ssl=1)
![](https://i0.wp.com/www.gcfcarbonfiber.com/wp-content/uploads/2023/03/ceck.jpg?fit=422%2C305&ssl=1)
Quality is our Attitude
GCF carbon fiber has a strict quality monitoring system and advanced detection equipment. All our goods pass through our rigid quality control before shipment. Therefore, we always will use a strict quality management system throughout the production of every detail, because we believe Strict quality control ensures the higher quality of products. Good faith, punctuality, rigorous quality control, and reasonable price, throughout is the pledge we make to each customer.
![](https://i0.wp.com/www.gcfcarbonfiber.com/wp-content/uploads/2023/03/baozhan.jpg?fit=422%2C305&ssl=1)
Packing details
Before the products ship out, all goods have been double verified. Our test engineer will check for quality, appearance, packing, and the necessary accessories, After finishing the quality check, our QC staff will carefully do a quality check again Fast delivery: via FedEx, UPS, DHL, TNT, etc ( will take 4 days to arrive) Fast production time – just 7 days –you can get it ASAP.
![](https://i0.wp.com/www.gcfcarbonfiber.com/wp-content/uploads/2023/03/mose.jpg?fit=422%2C305&ssl=1)
Advanced Detection Equipment
GFP carbon fiber manufacturers have high-quality professional technicians and advanced production equipment.raw carbon fiber material it’s imported from Japan Toray.CNC equipment is import from Germany, All of the products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world. Our well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee total customer satisfaction
Superior quality and unmatched expertise under one roof!
Our expertise extends to advanced knowledge of various composite materials, including carbon fiber, fiberglass, and Kevlar, and the tooling configurations that are appropriate for our customer’s project goals. We use the autoclave methodology to support a variety of business verticals for substantial-volume and low-volume projects.